For this driver, please select Audine on the Setup tab.
The Audine/Genesis driver is selected using the Audine selection in the Setup tab.
The driver supports shutter operation and up to 8x8 binning.
Select the parallel port address using Port. If your Audine is connected using a QuickAudine USB interface, connect to it by selecting the USB option form the Port drop-down.
The Interrupts field is intended for older Windows 98/ME systems, which are no longer supported by MaxIm DL.
Focus Fast Flush turns on/off a fast flushing mode. The slow flushing mode more thoroughly empties all residual charge from the sensor, but takes longer. Sensor Type can be set to KAF-400, KAF-1600, or KAF-3200 to match the size of sensor in the camera. No special settings are required for different versions of the sensor (e.g., ”blue plus” sensors). The Shutter Logic control can be used to invert the polarity of the shutter driver output.
Clicking the Advanced button brings up the Audine Configuration dialog. This dialog allows you to specify the technique MaxIm DL will use to abort an exposure, when controlling a USB camera. Three options are available. The Standard option issues the abort command expected by the QuickerAudine interface. The Alternate option uses a different abort command that works with most of the earlier QuickAudine interfaces. The final option is Download. Select this option if neither of the other two options work correctly. Download causes MaxIm DL to transfer the image from the camera when the exposure is aborted, rather than issuing an abort command. The Download option is far more robust than the other two, but transferring data from the camera causes a pause whenever an exposure is aborted.
These cameras use open-loop cooling, so the cooler controls are not enabled when this camera is in use.
Availability of this feature depends on Product Level.